Energy-saving multi-function heat pump triple supply, is a set of refrigeration, heating, hot water in one integrated energy system unit, each function can run alone, but also combined operation, refrigeration can be used for total heat recovery for hot water, comprehensive energy efficiency of 700% .

Multi-function:  refrigeration, heating, hot water, central integrated energy system, can be cooling or heating at the same time produce hot water, without air-conditioning can also produce hot water.

Health and Comfort: The use of water as a hot and cold medium, supply to terminal of the air conditioning and floor heating, in the summer is not wet stuffy, winter is not dry. Terminal  humidification, dehumidification, purification optional. Room air is not pollution.

Central hot water, can bubble hot spring, can be heated for the swimming pool, dehumidification, good physical and mental health.

Saving Energy and Money: fully recover the waste heat generated by refrigeration to heat hot water, refrigeration + hot water COP up to 700% , EER is 2.3 times of ordinary air conditioning, is 1.8 times of air energy water heater. The running cost of single hot water is only 1/4 of electric water heater and 1/3 of gas-fired boiler. If you choose a large capacity hot water tank, you can use the cheap valley electric heating water at night, more economical.

Investment and operation cost is low: A multi-purpose machine, a set of machines can meet the needs of air conditioning, hot water, heating.

The unit occupies a small area, the equipment and the installment expense are low, the operation time can recover the cold and heat energy sufficiently, causes the building interior cold and heat energy as far as possible to achieve the balance, reduces the external energy demand, thus reduces the operation expense.

High-efficiency heating: the ground source type extracts energy from the soil for refrigeration and heating, is not affected by outdoor ambient temperature, does not need defrosting, stable and efficient heating and hot water production. Air Source low-temperature type uses air enthalpy technology, 30 degrees below zero can be stable heating and hot water production.

Safe and reliable: Hot Water without strong electricity, no waste gas, waste residue, will not burn, will not explode, safe to use. Water floor heating will not leak electricity, will not scorch the floor, crack.

Clean and environmental protection: Adopting environment-friendly refrigerants, no waste gas and residue discharge, clean and sanitary, beautiful, improve the building environment, fully recover cold and heat, reduce urban heat island and cold island effect.

Tailor-made: According to user needs, can customize different functions: can have air conditioning refrigeration, heating, hot water, cold water and other functions, can be four-pipe fan coil, constant temperature and humidity machine to provide heat and cold source, and the interior can be heat recovery.

Compressor multiple protection against hydraulic shock design, radial axial double floating structure, built-in seal cover, can partially offset hydraulic shock, reduce internal leakage, reduce operating noise, built-in motor overload protector and pressure protector, effective protection of the compressor to prevent burning.

The electronic expansion valve adopts multi-dimensional control, with large adjustment range, quick action, precise adjustment, stable and reliable, and adopts refrigerant undercooling and storage technology to ensure that the refrigerant in front of the valve is liquid, so as to realize the best match of refrigerant flow rate, optimum operating efficiency under off-design conditions.

The structure of fin-and-tube heat exchanger is optimized. According to the heat exchange capacity of each channel, refrigerant is distributed in balance. The anti-corrosion shell-and-tube heat exchanger or casing heat exchanger is adopted in the water side, and the latest technology of uniform distribution is adopted to make full use of the area of the heat exchange tube, so as to improve the operation efficiency of the whole machine.

Automatic intelligent control, comprehensive protection, to avoid repeated shut-down, so that the unit stable, reliable and efficient operation.

Modular design, multiple modules can be combined, the internal communication network is modular, according to the heat demand automatically adjust the number of unit operation and compressor operation.

Computer full automatic control, easy to operate. Load Regulation and security protection are all accomplished by computer, which can realize unmanned operation and Internet control through RS485 communication.

Provide a variety of control function settings, with fault alarm and information storage functions, to provide remote alarm, monitoring functions, so that customers timely understanding of the operation of the unit.

Technical parameters