The evaporative condensing chiller adopts evaporative condenser. The cooling water evaporates directly from the refrigerant, saving 20% energy and 80% water compared with the conventional cooling tower.

characteristic:

• The optimized combination of condensing coil flow path, spray system and air duct system can achieve better heat exchange and effectively improve system energy efficiency.
• After the high-strength dynamic balance and static balance test, the fan will not be disassembled, and the static balance will be checked again before it is assembled to the cooling tower to ensure its reliable performance.
• The blade is made of hollow aluminum alloy, and the central hub is made of high strength steel plate, which ensures that the fan has enough strength when it rotates at high speed. The streamlined blade of the wing can ensure enough air volume and pressure and reduce the noise of the fan.
• The air duct adopts modeling design, which can effectively improve the efficiency of the fan. It makes full use of the gas flow homogenization theory, combines with the engineering practice experience and the measured data. The inner wall curve adopts elliptic curve. Compared with the natural diffusion type air duct with straight line, the air duct eliminates the phenomenon of air flow falling off the wall, reduces the vortex area, greatly reduces the negative pressure area in the center of the air duct, and reduces the air outlet The wind speed distribution tends to be uniform.
• The outdoor totally enclosed motor is adopted, with protection grade of IP55 and insulation grade of F. Oil free maintenance, high reliability, long trouble free operation time.
• The low head and large flow water pump can maintain a small consumption of power while ensuring sufficient large spray water, which improves the effect of the equipment. The pump adopts mechanical seal, with strong wear resistance and long service life. The low point of the pump is equipped with a screw plug drain, which is convenient for shutdown and drainage, and prevents the vortex shell from freezing and cracking due to water storage in winter.
• After fully considering the problem of rust prevention, the galvanized steel material is adopted for the framework, panel and other steel, and meets the requirements of low temperature. In order to improve the corrosion resistance, low temperature resistance and adaptability of galvanized steel under various environmental conditions, the tower body is made of thick galvanized steel, and the scratch and damage on the steel plate surface are prevented during the processing.